Flexible Bollard – 125mm Light-Duty Polymer Safety Post

Description

This Flexible Bollard is a slim Φ125 polymer post for layouts that need a clear boundary without bulky hardware. Offered in 500mm, 750mm and 1000mm heights, it works as a walkway marker, gate indicator or equipment boundary inside workshops, warehouses and commercial buildings, and its narrow 125mm footprint fits corridors, doorways and tight corners where a wider post would get in the way. The body is molded from imported high-molecular polymer in yellow and black, so it flexes on contact and returns to shape — a hand cart, trolley or light vehicle leaves a working bollard rather than a dented one. The base is powder coated and each fixing is closed with an SS304 cap nut, keeping the post rust-free in wash-down bays, outdoor yards and cold stores.

Key Features

Slim Φ125 profile

• – A narrow polymer post that suits aisles, doorways and dense layouts where a larger bollard would take up space or interrupt the workflow.

Self-recovering body

• – Contact from trolleys, hand carts and light vehicles makes the post flex and spring back, so the boundary stays in place without repair or replacement.

Three standard heights

• – 500mm, 750mm and 1000mm options range from low equipment boundaries to clearly visible gate and lane markers.

Weather and chemical resistant

• – UV resistance tested to ISO 4892-3 with a non-corroding polymer body, suitable for indoor plants, outdoor areas and low-temperature rooms.

Rust-free fixing system

• – Exposed base metal is black powder coated and tested to 500 hours of neutral salt spray, while dacromet anchor bolts tested to 1,000 hours close with SS304 cap nuts.

Flexible spacing, simple installation

• – Posts install individually with an inverted-cone chemical anchor, so a marking line can be set at whatever spacing each area or traffic route requires.

Specifications

Materials & Finish

Bollard body:

• Imported polymer plastic with strong weather and chemical resistance; the natural-color material keeps low chemical activity, so the post resists aging and corrosion.

Base:

• Metal and rubber components combined in assembly; exposed metal is black powder coated and withstands 500 hours of neutral salt spray with no rust.

Ground connection:

• An inverted-cone chemical anchor bolt with dacromet coating resists 1,000 hours of neutral salt spray and is closed with an SS304 cap nut for a firm, tidy finish.

Assembly & Installation

Each post is positioned to suit the area being marked, fixed to the concrete floor with an inverted-cone chemical anchor bolt and closed with an SS304 cap nut. Nothing has to be excavated, welded or painted on site, and because every bollard is independent, a line can be installed in stages, extended later or re-arranged when racks, machines or gates are moved. The polymer body is unaffected by vehicle contact, and the powder-coated base keeps its appearance in areas that are washed down regularly.

Applications

Walkways and lanes

• – Marks pedestrian routes and internal lanes through workshops, warehouses and loading areas.

Factory gates and doorways

• – Indicates openings and keeps vehicles clear of door frames, posts and control panels.

Isolation and restricted areas

• – Defines zones that are reserved, hazardous or accessible only to authorised staff.

Equipment and machine boundaries

• – Sets a slim, visible limit around presses, conveyors and service areas.

Parking areas and driveways

• – Guides vehicle movement and shields column bases, kiosks and wall corners.

Cold storage and cleanrooms

• – A non-corroding post for low-temperature rooms and hygiene-controlled production areas.

Public and commercial buildings

• – Marks entrances, service yards and equipment zones in a consistent yellow-black standard.

Why Choose Little Buffalo

Little Buffalo Technology (Ningbo) Co., Ltd. produces polymer flexible impact protection products in Ningbo, Zhejiang, China, for distributors, contractors and facility operators worldwide. Our bollards are molded and finished in-house, supplied with documented UV and salt spray verification, and can be customized for height, color and branding under our OEM/ODM service. Where vehicles rather than carts cause the contact, our heavier impact flexible bollard in Φ160 is the better match; for the complete selection, see the flexible bollard range.

Certifications

• TÜV certified (refer to certificate)
• UV resistance verified to ISO 4892-3
• Neutral salt spray tested: 500 hours on the powder-coated base and 1,000 hours on the anchor bolt, no rust
• Independent third-party test reports available on request

Packing & Logistics

• Reinforced double-corrugated carton packing for export protection
• Package size: L1100 × W1000 × H1300mm (bulk packing, less than one pallet)
• Worldwide delivery available; contact us for sea, air or door-to-door freight options and FOB/CIF terms

Service & Support

• Fast, project-based quotation with post layout suggestions
• Samples available for evaluation before bulk orders
• OEM/ODM service: custom height, color, logo and packaging
• Technical support for installation and site planning
• Contact us by email at

[email protected]

or WhatsApp at +86-15381988180

FAQ

Q: What is a Φ125 flexible bollard used for? A: It is a slim polymer post used to mark and protect areas — walkways, gates, doorways, equipment boundaries and restricted zones. Its narrow 125mm diameter suits corridors and tight layouts where a wider post would obstruct the space.

Q: How does the 125mm bollard differ from the 160mm model? A: The Φ125 post is the slimmer, lighter option for pedestrian and cart-level areas, while the Φ160 impact flexible bollard is designed for heavier or more frequent vehicle contact. Many sites use both — Φ160 at vehicle points and Φ125 for walkway marking.

Q: Which height should I choose? A: The bollard is available in 500mm, 750mm and 1000mm. Use 500mm for low boundaries and equipment limits, 750mm for general walkway marking, and 1000mm where the post needs to stay visible to drivers. Custom heights are available.

Q: How are the posts installed? A: Every post is fixed with an inverted-cone chemical anchor bolt with a dacromet finish and closed with an SS304 cap nut, so no excavation, welding or painting is needed on site, and the layout can be changed later.

Q: Is the bollard certified, and can it be customized? A: The bollard is TÜV certified to meet global industry safety standards, and independent third-party test reports are available on request. Customized heights, colors and branding can be produced under our OEM service.